- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CDM8048, страница 3
3
Important safeguards
· Read carefully through this manual to familiarize yourself with this high-quality sound system.
· Use only in a 12-volt DC negative-ground electrical system.
· Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
· When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may
cause serious damage to the unit.
· DO NOT attempt to disassemble the unit.
· Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as
electrical shock or laser beam exposure.
· If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before
operating the unit.
· Keep the volume at a level at which you can hear outside warning sounds (horns sirens, etc.).
· DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
· Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a
thunderstorm.
· Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a
strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.
· Stop the car before performing any complicated operation.
· The unit is only designed for use with 4 speakers. Do not combine output for use with 2 speakers. Do not ground negative speaker
leads to the chassis ground.
· Do not install the unit in place where it is exposed to direct sunlight (including the faceplate), in order to avoid high heat.
· The faceplate is a precision piece of equipment that contains sensitive electronic components. Do not subject it to excessive shock.
· Be careful not to drop or shock the unit strongly, it may break or crack because it contain glass parts.
· When extending the ignition, memory backup or ground cable, use diameter of 0.75mm (AWG18) or more automotive grade cable
to avoid wire deterioration or damage to the wire coating
Ваш отзыв будет первым
Вопросы пользователей
0