- Тип техники
- Бренд
Просмотр инструкции стиральной машины Hotpoint-Ariston AVTF 109, страница 16
16
GB
Washing machine description
A) Opening (Fig. 1).
Lift the external lid and open it completely.
B) Opening the drum (Soft opening):
With one finger, push the button indicated in fig. 2
and the drum will open delicately.
C) Loading the washing machine. (Fig. 3).
D) Shutting (Fig. 4).
- close the drum fully by first shutting the front door
followed by the rear one;
- then ensure the hooks on the front door are perfectly
housed within the seat of the rear door;
- after the hooks have clicked into position, press
both doors lightly downwards to make sure they
do not come loose;
- finally shut the external lid.
E)
Drum End Stop (Fig. 2).
Once the wash cycle has been completed, the
drum will position itself with the doors facing
upward for ease of opening.
How to open and shut the drum
Display:
displays the progress of the wash cycle and/or the
programme (see pages 17-19).
SPIN * key Regulates the speed and cancels the spin
cycle speed completely (see page 19).
TEMPERATURE key adjusts the wash temperature
from 90° to 0°. (see page 19).
DELAY TIMER key. To delay the start of the wash
cycle by up to 24 hours (see page 19).
KEYBOARD LOCK key. To lock all the keys on the
washing machine during operation or during Stand-by
mode.
ON/OFF key to turn the washing machine on and off
(see page). 18).
START/RESET key. To start programmes or cancel
incorrectly set programmes (see page 18).
PROGRAMME knob. Selection of programmes (on
page 18).
PROGRAMME
SELECTION
knob
Control panel
FUNCTION
buttons
Display
ON/OFF
key
START/
RESET
key
TEMPERATURE
SPIN CYCLE DELAY
TIMER
KEY-
BOARD
LOCK
* To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by continuously
rotating the drum at a speed which is slightly faster than the normal washing speed.
When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set frequency.
If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Гость
19 августа 2018, Томилино
ОШИБКА Ф 05
0 ответов
Ответить
1