- Тип техники
- Бренд
Просмотр инструкции эл. водонагревателя Gorenje GBU200B6, страница 16
16
Dear buyer, we thank you for purchase of our product.
PRIOR TO INSTALLATION AND FIRST USE, PLEASE CAREFULLY
READ THESE INSTRUCTIONS
This water heater has been manufactured in compliance with the relevant standards
and tested by the relevant authorities as indicated by the Safety Certificate and the
Electromagnetic Compatibility Certificate. Its basic technical properties are stated upon
the nameplate, glued between the connection pipes. The water heater may be connected
to water and electric power supply only by a qualified specialist. The reach in its inside
due to the repair or removal of limestone and checking and replacement of anti-corrosion
protection anode may be performed only by an authorised service workshop.
BUILDING-IN
The water heater shall be built as close as possible to the outlets. It has to be fitted to
the wall using appropriate rag bolts with minimum diameter of 8 mm. The walls with great
portability must be at place where the water heater shall hanged up be suitably reinforced.
Due the universal construction the waterheater it can be fixed vertically on the wall or
horizontally on the wall (output pipes must be on the left).
TECHNICAL PROPERTIES OF THE APPLIANCE
Type GB 50 GB 80 GB 100 GB 120 GB 150 GB 200
Model GBU 50 GBU 80 GBU 100 GBU 120 GBU 150 GBU 200
Volume [l]
50 80 100 120 150 200
Rated pressure [MPa]
0,6
Weight / Filled with water [kg]
24/74 30/110 34/134 38/158 44/194 66/266
Anti-corrosion protection of tank Enameled / Mg Anode
Power of electrical heater [ W ]
2000
Number and power of heating elements [ W ]
2 x 1000
Connection voltage [V~]
230
Protection class
I
Degree of protection
IP 25
Heating time to 75°C
1)
[h]
1
55
3
05
3
55
4
35
5
45
7
40
Quantity of mixed water at 40°C [l]
96/80 151/130 199/174 238/210 296/260 394/350
Energy consumption
2)
[kWh/24h]
1,0/1,13 1,20/1,40 1,33/1,46 1,55/1,70 1,64/1,85 2,10/2,35
1) Time for heating of the whole volume of heater with electric immersion heater by entering temperature of cold water
from water supply 15°C.
2) Energy consumption to maintain stable temperature of water in the water heater 65°C at surrounding temperature
20°C, measured according to DIN 44532.
GB
Ваш отзыв будет первым