- Тип техники
- Бренд
Просмотр инструкции сварочного оборудования Fubag IN 206 LVP, страница 7
www.fubag.ru
Omperator's anual
--6
TIG m with functionode LiftArc
The DC TIG welding requires a protective gas (argon).
Follow the steps as below :
- Connect the earth clamp on the positive (+) pole.
- Connect a TIG torch with valve on the negative (-) pole.
- Connect the pipe of the gas bottle and adjust the flow.
- Select the TIG position with the selector .
-Adjust the wished current (display ) using the keys and .
- To boot: touch the electrode on the welding part; raise the electrode 2 to 5 mm of the part to be
welded.
- aise the torch for a quick gesture, do not cut the gas only after electrode cooling.
This corresponds to the end of welding time required for the
gradual decline in the welding current until the stop of the arc.
This function helps to avoid cracks and craters at end of
welding.
This function is not activated (timer at 0 sec). To activate it,
proceed as follow:
- Press 3 seconds on the selector button .
- The inscription "dS" (Downslope) starts blinking then one
figure appears.
- Set the automatic arc slope you wish from 0 to 10 sec (display
) using key and .
6
145
6
145
R
AutomaticArc slope with time adjustable (for IN 206 LVP)
Functjon
activation
Ваш отзыв будет первым