- Тип техники
- Бренд
Просмотр инструкции генератора Fubag HS 2500, страница 16
- 15 -
www.fubag.ru
Omperator's anual
9. Trouble Shooting
When generator engine fails to start after several attempts, or if no electricity is available at the
output socket, check the following chart. If your generator still fails to start or generate electricity,
contact your nearest FUBAG Generator dealer for further information or corrective procedures.
10. Warranty
Warranty refer to defects of materials and components and do not refer to components subject to
natural wear and maintenance work.
Only machines cleaned from dust and dirt in original factory packing fully completed, provided with
instruction manual, warranty card with fixed sales date with a shop stamp factory serial number and
originals of sales and ware receipt issued by salesman are subjects of warranty. Within the warranty
period the service center eliminate free of charge all detected production defects. The manufacturer
disclaims warranty and legal responsibilities if nonobservance of the instruction manual by user,
unqualified disassembling repair or maintenance of the machine as well does not bear responsibility
for caused injury to persons or damages.
When Engine Fails to Start
Check if choke lever is in its proper
position
Set the choke lever to "CLOSE" position
Check if fuel cock is open If closed, open fuel cock
Check fuel level If empty, refill fuel tank making sure not to overfill
Check to make sure generator is not
connected to an appliance
If connected, turn off the power switch on the
connected appliance and unplug
Check spark plug for loose spark
plug cap
If loose, push spark plug cap back into place
When No Electricity Is Generated at Receptacle
Check to make sure no-fuse breaker
is in the ON Position.
After making sure that the total wattage of the
electrical appliance is within permissible limits and
there are no defects in the appliance, turn the circuit
breaker to the"ON"position. If breaker, continue to
actuate, consult your nearest servicing dealer.
Check AC terminals for loose
connections.
Secure connections if necessary.
Check to see if engine starting was
attempted with appliances already
connected to generator.
Turn off switch on the appliance and disconnect cable
from receptacle. Reconnect after generator has been
started properly.
Ваш отзыв будет первым