- Тип техники
- Бренд
Просмотр инструкции генератора Fubag BORA 90 ТН, страница 5
www.fubag.ru
Omperator's anual
--4
THERMOSTAT INSTRUCTIONS
-
-
-
-
-
-
°
-'
-
-
At first turn the thermostat to “Max” and let the heater operate with full power input. When the room
temperature reaches the required value, turn the thermostat to left until it switches off.
The thermostat will then switch on and off automatic to control the room temperature according to the
preset value and keep the room temperature constant.
When using the heater for the first time, you may notice a slight emission of smoke. This is quite
normal and it stops after a short time. The heating element is made of steel and was coated with a layer
of protection oil by production. The smoke is caused by the left oil when heated.
To turn off the heater after use - toggle switch to the second position, and give the work to cool the
heating element is not less than 2 minutes. Then switch the mode switch to the first position, and
remove the connector plug from the socket.
Before cleaning the appliance, disconnect it from the socket and let it cool down.
The enclosure is easily to get dirty, wipe it often with soft sponge. For very dirty parts, wipe with a
sponge dipped in < 50 C water and mild detergent, then dry the heater enclosure with clean cloth.
Be careful not to let the water enter the appliance inner.
Don t splash water onto the heater never use solvent like gasoline, isoamyl acetate, toluene etc to
clean the heater, in order to protect the enclosure.
Clean the coupler, dry and pack it in a plastic bag.
When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in
the packing box and store it in a dry, ventilated place.
5 aintenance.M
6s
7
. Transport & torage
. Warranty
When the device is in storage and transportation, please try to keep it from being exposed to the
rain. When loading, attach ATTENTION to the charger packing. It is recommended to free it from
moisture, erodible gas and dust in storage where it must be kept dry and have good ventilation. The
tolerable temperature, and the relative humidity.After the package has been opened, it is suggested
to repack the product as per requirement for future storage and transport.
Warranty refer to defects of materials and components and do not refer to components subject to
natural wear and maintenance work.
Only machines cleaned from dust and dirt in original factory packing fully completed, provided with
instruction manual, warranty card with fixed sales date with a shop stamp factory serial number and
originals of sales and ware receipt issued by salesman are subjects of warranty. Within the warranty
period the service center eliminate free of charge all detected production defects. The manufacturer
disclaims warranty and legal responsibilities if nonobservance of the instruction manual by user,
unqualified disassembling repair or maintenance of the machine as well does not bear responsibility
for caused injury to persons or damages.
Ваш отзыв будет первым