- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 724
Section 06 DRIVE SYSTEM
Subsection 03 (DRIVEN PULLEY)
ROLLER DIAMETER SERVICE LIMIT
Inner diameter 12.5 mm (.492 in)
Outer diameter
23.5 mm (.925 in)
Measure the roller thickness.
A35D14A
A
A. Thickness of roller
ROLLER THICKNESS
Service limit
10.5 mm (.413 in)
Cam
Verify contact surfaces of cam no. 4 for visible
damages.
Check splines condition.
ASSEMBLY
The assembly is the reverse of the disassembly
procedure. However, pay attention to the follow-
ing details.
Clean threads of roller axles no. 11 before in-
stalling their screws no. 8. Apply Loctite 271
(red) (P/N 293 800 005) on screw threads. Torque
screwsto11N•m(97lbf•in).
Make sure to install the proper cam. The cam an-
gle is indicated on the cam. Refer to TECHNICAL
DATA to know which cam must be used.
A35D16A
During cam installation, make sure to align the
cam slides with the rollers.
INSTALLATION
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following
details.
Apply Loctite antiseize lubricant (P/N 293 800 070)
on countershaft splines.
Apply Loctite 243 (blue) (P/N 293 800 060) on driv-
en pulley bolt.
Perform a pulley alignment before starting engine
and verify drive belt height. Refer to PULLEY
ALIGNMENT and DRIVE BELT.
BUSHING REPLACEMENT
Large Bushing
Remove circlip.
Install the support plate included in the large bush-
ing extractor (P/N 529 031 100) inside sliding half.
mmr2005-133 205
Ваш отзыв будет первым