- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 635
Section03FUELSYSTEM
Subsection 01 (FUEL TANK AND FUEL PUMPS)
A33C5TA
Disconnect pump electric connector.
Disconnect hose from pump.
A33C5PB
2
1
1. Electrical connect
2. Pump hose
ELECTRIC FUEL PUMP
INSTALLATION
For installation, reverse the removal process but
pay attention to the following.
Install a new gasket.
Align the arrow on fuel pump assembly with the
one on fuel tank. Keep arrows aligned when tight-
ening fuel pump assembly.
Install a torque wrench perpendicularly (90°)tofu-
el pump nut wrench (P/N 529 035 899). Torque
fuel pump nut to 27 - 30 N•m (20 - 22 lbf•ft).
A32I1BA
2
A
1
1. Arrows
2. Torque wrench
A. 90°
Use a new clamp to secure hose to fuel pump
fitting.
CAUTION: Make sure that hose clamps are
tight to avoid that they turn on their fittings.
Manual Start Models
NOTE: When fuel tank is completely emptied, it
may require up to 25 - 30 pull on rewind starter to
fill the electric fuel pump reservoir. Filling the fuel
tank will solve this problem. The fuel inside the
fuel tank will flow through the bypass hole of the
electric fuel pump reservoir.
ELECTRIC FUEL PUMP
PRESSURE REGULATOR
REMOVAL/INSTALLATION
Remove fuel pump assembly as explained above.
Remove 2 screws retaining regulator to pump as-
sembly flange.
Replace O-rings with new ones. Install them in
pump assembly flange bore.
CAUTION: Regulator O-rings must be installed
in pump assembly flange bore.
Reverse removal procedure for installation.
Install a new gasket, then reinstall fuel pump as-
sembly as explained above.
mmr2005-123 113
Ваш отзыв будет первым