- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 616
Section02ENGINE
Subsection 11 (REWIND STARTER)
To install rope no. 5, insert rope into sheave no. 4
orifice and lock it by making a knot, leaving behind
a free portion of about 25 mm in length. Fuse rope
end with a lit match and insert it into sheave.
A32C6HA
25 mm
FREE PORTION
FREE PORTION INSERTED INTO SHEAVE
Lubricate housing post with silicone compound
grease. Install sheave.
To adjust rope tension:
Wind rope on sheave and place rope sheave into
starter housing making sure that the sheave hub
notch engages in the rewind spring hook.
Rotate the sheave counterclockwise until rope
end is accessible through rope exit hole. This will
give 1/2 turn of preload.
Pull the rope out of the starter housing and tem-
porarily make a knot to hold it.
A01C0CA
TYPICAL
Lubricate pawl no. 6 with Molykote PG 54
(P/N 420 899 763) then install over rope sheave.
A32C6CA
Lubricate pawl lock no. 7 with Molykote PG 54
(P/N 420 899 763). Install over pawl.
A32C6DA
Install step collar no. 8 with its sleeve first. Lubri-
cate a new O-ring no. 9 and locking element no. 7
with Molykote PG 54 (P/N 420 899 763). Install
over pawl lock.
mmr2005-121 93
Ваш отзыв будет первым