- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 431
Section 09 REAR SUSPENSION
Subsection 04 (SHOCK ABSORBER INSPECTION AND SERVICING)
Compress the carrier to access and remove the
snap ring.
All HPG T/A Shocks
With the seal carrier removed, slowly lift and
remove damper rod assembly from the damper
body.
NOTE: Remove damper rod assembly slowly to
reduce oil spillage and prevent piston seal damage
by damper body threads. Wrap the damper body
with a shop cloth to capture possible overflow oil
while removing the damper piston.
1
A27F0AA
1. Oil flows
Discard old oil into storage container. Never reuse
damper oil during shock rebuild.
HPG T/A Shocks Except with External
Reservoir
Remove valve core. Using compressed air
pressure, carefully remove floating piston from
damper body. Hold shop cloth over damper body
opening to catch released floating piston. Allow
room for floating piston to leave damper body.
A27F06A
TYPICAL
HPG T/A Shocks with External Reservoir
Install floating piston remover tool (P/N 529 035
907) on shock absorber, as shown below.
1
A32F3YA
1. Floating piston remover tool (P/N 529 035 907)
Place shock absorber in a position where external
gas reservoir opened extremity is blocked. Refer
to following photo.
426 mmr2005-108
Ваш отзыв будет первым