- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 322
Section07ELECTRICALSYSTEM
Subsection 04 (ACCESSORIES)
480 W Models (SDI engines)
Connect the VCK (Vehicle Communication Kit)
(P/N 529 035 981). In BUDS, click on the relay
2 (R2) button to supply lighting system with 12
volts.
529 035 981
To supply 12 volts to the accessories, click on the
relay 3 (R3) button.
Use the wiring diagram in WIRING DIAGRAM sec-
tion to troubleshoot lighting and accessories sys-
tems.
12-VOLT POWER OUTLET
(cigarette-lighter type)
Removal
Remove the console.
Remove connectors from the power outlet hous-
ing.
Unscrew the large nut then remove the 12-volt
power outlet.
Test
Remove power outlet.
Unplug the power outlet connectors.
Using the multimeter FLUKE 111 (P/N 529 035
868), measure the voltage between RED/BLACK
and BLACK wires.
529 035 868
The obtained value should be between 12 and
14.5 Vdc.
– No voltage:
• Check accessories fuse (20 A), connectors
and wiring harness.
– Voltage is good:
• After checking the accessories, change the
power outlet.
Installation
The installation is the reverse of the removal pro-
cedure.
BEEPER (reverse alarm)
Removal
The beeper is located near the ignition coil.
Open the front hood, remove the windshield then
remove screws retaining the accessories panel.
Unplug connector from beeper.
Unscrew retaining ring then remove beeper.
Test
NOTE: Before testing the beeper, make sure the
connectors are installed on proper beeper tabs.
308 mmr2005-085
Ваш отзыв будет первым