- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1347
Section 09 REAR SUSPENSION
Subsection 02 (ARTICULATING SLIDE SUSPENSION)
4, Rear Spring
Remove top idler wheels.
Unscrew one end of shock.
Remove spring.
5, Front Spring
Remove circlips retaining spring support to top
and bottom of front arm.
Holding spring end, remove lock pin of top spring
support then bottom support lock pin.
Unbolt front idler wheel axle.
Remove idler wheel on side where axle retaining
plate is not welded.
Remove springs.
A22F1CA
1
1. Circlips
6, Support Plate
Drill rivets to remove support plate. Use a 8 mm
(21/64 in) drill bit.
A22F1DA
Rivets can be substituted by M8 x 20 bolts and
nuts.
3, Horse-Shoe Washer
For deep snow riding, do not install washer.
For trail riding with passenger and/or weight, in-
stall 1 washer under each rubber stoppers.
For trail riding with heavy load and/or pulling a load,
use 2 washers under each rubber stoppers.
7, Shock
Install shock with its rod upward.
SHOCK ABSORBER SERVICING
Secure the shock body end in a vise.
A14F0BA
1
TYPICAL
1. Clamp
CAUTION: Do not clamp directly on shock
body.
Examine each shock for leaks. Extend and com-
press the piston several times over its entire
stroke then check that it moves smoothly and
with uniform resistance.
mmr2005-049 491
Ваш отзыв будет первым