- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1236
Section 07 TRANSMISSION
Subsection 03 (DRIVEN PULLEY)
1
A05D0YA
2
1. When loosening knob
2. Hold stop nut with a key
Remove tool and cam no. 3. Remove spring no. 4
and sliding half no. 10.
5, Large Bushing
Remove 3 screws no. 6 with washers and pry
bushing no. 5 out.
INSPECTION
2,9, Slider Shoe
Black slider shoe = forward
Red slider shoe = reverse
Check cam slider shoes for wear. Replace when
inside edge thickness of cam slider shoe slope
base is 1 mm (.039 in) or less.
2
1
A15D0OA
3
1. Measure thickness of slope base here
2. Sliding pulley side
3. Slop base
ASSEMBLY
Assemble driven pulley components by reversing
the disassembly procedure except for the follow-
ing.
2,9, Slider Shoe
When replacing slider shoes, always install a new
set (3 shoes) to maintain equal pressure on the
cam.
Install slider shoes as per following photo. Red
slider shoes are being used for reverse and black
ones for forward.
A05D14A
BLACK SLIDER SHOES ON CAM
A05D12B
RED SLIDER SHOES ON PULLEY HALF
2,4,5, Roller Pin, Outer Cam and Spring
Insert spring in adjusting hole no. 3 into sliding
half, as illustrated.
372 mmr2005-036
Ваш отзыв будет первым