- Тип техники
- Бренд
Просмотр инструкции квадроциклы Can Am DS 70 2011, страница 117
TROUBLESHOOTING GUIDELINES
ENGINE TURNS OVER BUT FAILS TO START (cont’d)
5. Spark plug/ignition (no spark).
– Remove spark plug from engine and reconnect it to spark plug cap.
– Ensure the ignition switch is set to ON, and the emergency engine stop
switch is set to the RUN position.
– Start engine with spark plug grounded to the engine away from spark plug
hole. If no spark appears, replace spark plug.
– If trouble persists, contact an authorized Can-Am dealer.
6. Engine compression.
– As the engine is rotated using the kick stater, “cycles” of res
istance should
be felt as the piston goes past top dead center (compression). If no pulsed
resistance is felt, it suggests a major loss of compression. Contact an autho-
rized Can-Am dealer.
ENGINE LACKS ACCELERATION OR POWER
1. Fouled/damage/worn spark plug.
– Clean/verify spark plug and heat range. Replace as required.
2. Lack of fuel to engine.
– Check items listed in ENGINE TURNS OVER BUT FAILS TO START.
3. Carburetor adjustments.
– Contact an authorized Can-Am dealer.
4. Engine is overheating.
– If the engine tends to overheat, try the following:
• Reduce vehicle speed but maintain sufficient speed to supply cooling air to
the engine. If engine is stilloverheating afterapproximately oneminute,stop
vehicle.
• Apply parking brake and stop engine.
• Let engine cool down.
• See an authorized Can-Am dealer as soon as possible.
– If overheating persists, contact an authorized Can-Am dealer.
5. Air filter/box clogged or dirty.
– Check air filter and clean if necessary.
– Check the position of the air intake tube.
6. CVT dirty or worn, including belt.
– Contact an authorized Can-Am dealer.
______________
115
Ваш отзыв будет первым