- Тип техники
- Бренд
Просмотр инструкции квадроциклы Can Am DS 70 2011, страница 102
MAINTENANCE PROCEDURES
Mechanical Brakes (DS 70
and DS 90)
Mechanical Brake Inspection
WARNING
Any brake system repair should
be performed by an authorized
Can-Am Dealer.
Check brake lever free-play (both
levers), adjust if necessary.
Check for lever operation, they should
move freely and have a firm feel when
brakes are applied.
If correct adjustment is unattainable,
see an authorized Can-Am dealer.
Inspect brake cables for excessive
wear, kinking or fraying.
Replace any cable that show signs of
wear, fraying or other damages.
Lubricate cables using CABLE LUBRI-
CANT (P/N 293 600 041) to reduce
premature wear and to ensure proper
movement of the cable.
WARNING
Always use a silicone-based lu-
bricant. Using any other lubricant
(such as a water-based lubricant)
may cause the brake cables to stick
or become stiff.
Have your authorized Can-Am dealer
inspect brake shoes for wear or dam-
age.
BRAKE SHOE MINIMUM THICKNESS
FRONT AND
REAR
1.5 mm (.06 in)
See your authorized Can-Am dealer if
a problem is detected concerning the
brake system.
Front Brake Cable Adjustment
Fully tighten all adjustment screws on
brake cables.
vmr2008-106-010_a
1. Adjustment screws on lever
vmr2008-102-009_a
1. Adjustment screws on cables
Press brake lever.
Adjust cable link so it is parallel to cable
support. Turn adjustment screws o
n
cable (not at lever) as required.
While reading this Operator’s Guide, remember that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
100
______________
Ваш отзыв будет первым