- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CMMD4049, страница 12
12 13
Operation Operation
General operations
Touch screen
Due to the touch screen, you can fulfill most
functions not only by pressing buttons but also
by touching the options you need.
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press RES button on the unit with a
pointed object (such as a ballpoint pen) to set
the unit to initial state.
When some errors occur on the display,
you can also press RES button to resume to
normal, and it will erase the clock setting and
some memorized functions.
Turning the unit on/off
Press PWR/SOURCE button on the RC or
PWR/SRC button on the panel to turn on the
unit. Press and hold the button more than 2
seconds to turn off the unit.
Open the monitor
Press OPEN button on the unit to open the
monitor. Press the button again, the monitor
returns to the previous state.
Angle setting
You can adjust the desired angle of the
monitor. Press ANGLE and ANGLE
buttons to adjust monitor backward or forward
by definite angle.
Please do not adjust the monitor tilt
manually, otherwise it can get damaged.
Volume control
Press VOL+/VOL- buttons on the RC or
rotate VOL regulator on the unit to increase/
decrease the sound level.
Setting the sound characteristics
Repeatedly press SEL button on the RC or
on the unit to select the desired parameter in the
following order: VOLUME => BALANCE => FAD
=> BASS => TREBLE => SUBWOOFER. After
selecting the desired parameter, you can adjust
its current level by pressing VOL+/- buttons on
the RC or rotating VOL knob on the unit.
Mute function
Press button on the RC or MUTE/NAV
button on the unit to turn off the sound. Press
the button again or adjust volume to resume
the sound output.
Equalizer setting
While listening to music, you can select the
corresponding preset modes to adjust the sound
quality perfectly by using AF/EQ button on the
RC. Press and hold the button repeatedly to
choose the following modes in turn: POP =>
CLASS => ROCK => Off (no equalizer).
Loudness
Press and hold TA/LOUD button on the RC or
TA/LOU button on the panel to activate loudness
function. This is to increase the low frequency,
which can improve sensitivity for your ears.
Keep pressing it again to quit this function.
Mode selection
• Repeatedly press PWR/SOURCE button
on the RC or PWR/SRC button on the unit to
select a mode: Radio => TV => NAVI (option)
=> SETUP => BT (not supported) => AUX =>
IPOD (not supported) => DVD.
• In any mode touch item on the screen
to display the Main menu. In the menu, touch
the item of the mode you need to select the
corresponding mode.
• In any mode touch the screen on any non-
functional area, then slide the page aside (both
up/down and rightwards/leftwards) to go to the
interface of the previous or next mode.
The DVD mode is only available when
a disc, USB or SD/MMC card is inserted into
the unit.
GPS navigation (option)
NAVI mode is optional and it is available only
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Ильназ
02 октября 2018, Самара
Не работает блютуз как подключиться подскажите пожалуйста
0 ответов
Ответить
0