- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CDM8056, страница 6
6
Din rear-mount
Installation using the screw holes at both sides of the unit.
1. Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2 positions at each side.
Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the shape of the screw holes in the bracket.
2. Screw
3. Factory radio mounting bracket.
4. Dashboard or Console
5. Hook (Remove this parts)
Note: The mounting box, outer trim ring, and the Half-sleeve are not used for this method of installation.
Caution: The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to
drop it or subject it to strong shocks.
The rear con nector that connects the main unit an d the control panel is an extremely impor tant part. Be car eful n ot to damage it by
pressing on it with fingernails, pens, screwdrivers, etc.
Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to
clean the socket on t he back of the con trol pa nel.
Ваш отзыв будет первым