- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CDM8054, страница 7
7
Removing the unit
1. Make sure the ignition is turned off, then disconnect the cable from the vehicle battery’s
negative (-) terminal.
2. Remove the metal strap a ttached the back of the unit (i f attached ).
3. Press RELEASE button to r emove the fron t panel.
4. Lift the top of the outer trim ring then pull it out to remove it.
5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard.
DIN REAR-MOUNT (Method B )
If your vehicle is a Nissan, Toyota, follow these mounting instr uctions. Use the scr ew holes
marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the
fa ctory radio mounting brackets supplied with your vehi cle.
To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket
with the screw holes on the unit, and then tighten the screws (5x5mm) on each side. Note: the
outer trim ring, sleeve and the metal strap are not used for method B installat ion.
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Слава
09 августа 2020, Калининград
На панеле горит значёк блютуз. Он вообще существует и как настроить?
0 ответов
Ответить
0