- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CDM8034, страница 10
10
Operation
General operations
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit.
Press OPEN button on the panel to open the
panel and press RESET button to restore the
unit to its original factory settings.
Power on/off
Press any button (except OPEN) to turn on
the unit. Press and hold PWR button to switch
the unit off.
After the unit is off, the volume level and
radio current settings will be memorized, and
when you turn the unit on it will resume the
stored status you previously set.
Volume control
Rotate VOL knob on the panel or press V+/V-
buttons on the RC to adjust the volume level.
Setting the sound parameters
Press repeatedly VOL knob on the panel
or SEL button on the RC to select an audio
setting: VOL (volume) => BAS (bass) => TRE
(treble) => BAL (balance) => FAD (fader).
Rotate VOL knob on the panel or press V+/-
buttons on the RC to adjust each setting.
• If the unit is turned off, all the settings
of each mode will be saved.
• If cutting off battery power or resetting the
unit, all the settings will return to factory default
settings.
• When DSP is set to any mode, Balance
and Treble are not adjustable.
• If you don’t adjust the setting within
several seconds after selecting the desired
setting, the unit will automatically return to the
current mode being displayed.
Setting other features
Press and hold VOL knob on the panel or
SEL button on the RC, and then shortly press
this knob/button repeatedly to select a setting.
Rotate VOL knob on the panel or press V+/-
buttons on the RC to adjust each setting.
INVOL: Set default volume level when the
unit is turned on.
CLOCK: you can set the clock. Rotate VOL
knob clockwise to set minutes; rotate VOL
knob counterclockwise to set hours.
24 HOUR: choose 24 hour clock display
mode or 12 hour clock display mode.
LOUD ON/OFF: Enable LOUD ON (Default
is LOUD OFF).
BEEP ON/OFF: if BEEP on, pressing any
key will make a beep sound.
DSP: Choose intended sound effect in the
sequence: POP => ROCK => CLASS => FLAT
=> NONE.
Sound mute
Press MUTE button to turn the sound off.
Press it again or rotate VOL knob on the panel or
press V+/- buttons on the RC to resume sound.
Mode select
Press MODE button repeatedly to select:
TUNER => CD => SD => USB => AUX.
CD, SD and USB modes are only
available if corresponding media device is in
the unit.
Display
Press DIS button repeatedly to see current
tuning information and time. Sequence of the
menu: Clock => PTY => PS => Radio frequency.
AUX in jack
AUX-in jack is intended for connecting an
external audio or video equipment to amplify
the sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks using
the car acoustic system.
Ваш отзыв будет первым