- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CMD2062G, страница 16
16
Operation
program is played the mode will skip to the
RDS mode automatically. It will resume to the
primary mode after the TA is over.
Program type (PTY)
Press PTY/MDC button on the RC to
activate the PTY function, press it repeatedly
to show Music group/Speech group. Choose
the needed PTY type by pressing the icon
in the touchable screen or pressing the
corresponding number buttons on the RC.
When PTY search is on, and the selected
type matches, PTY information is displayed.
If PTY code is different or not available, PTY
engaging automatically exit to normal mode.
Stereo/mono reception
Press STEREO/MONO button on the RC
to select stereo reception or mono reception
mode. When the received stereo signal is weak,
switch to mono mode to improve the signal.
The function is available only in FM bands.
Radio background mode
While listening to the radio, press and hold
MODE button on the front panel. Navigation
mode will be enabled (if the GPS SW card is
connected), while the radio will be played in
background mode.
TV tuner operation
Connect a TV antenna to the TV antenna
jack of the unit. Select TV mode, then touch
the center of the display; following interface will
be displayed:
SEEK+/ on the RC, the automatic search
will start. It will play when finds the station.
Programming tuner stations
There are 6 numbered preset buttons on the
RC, with which you can store and recall stations
for each band (18 FM, 12 AM (MW)). Select a
station, then press and hold a preset button.
The station will be saved in the memory under
the corresponding number. To recall a stored
station, press the corresponding preset button.
Auto memory store/Preset scan
Auto store: Select a band, press and hold
P.SCN/RPT button on the RC to enter auto
store mode. The radio will automatically store 6
stations to the 6 preset memories of the current
band. To stop auto store, press the button again.
Preset scan: Select a band, press P.SCN/
RPT button on the RC to scan all preset
stations in the memories of the current band.
To stop preset scan, press the button again.
RDS background
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
AF (Alternative frequencies) function
Press AF/TA button on the RC to enable
AF function. When the radio signal strength is
poor, enabling the AF function will allow the
unit to automatically search another station
with the same PI (Program Identification) as the
current station but with stronger signal strength.
TA (Traffic alarm) function
Touch TA button on the screen or press and
hold AF/TA button on the RC to switch on the
TA function. When TA is on, the TA displays
on TFT, or else, if there is no TP information,
the mode will search TP station automatically.
When TA is playing, the volume will be adjusted
to a TA level automatically. When other modes
are activated (such as DVD, AUX), if a TA
Ваш отзыв будет первым