Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции автомагнитолы Hyundai Electronics H-CCR8190M, страница 9

Hyundai Electronics
Operation
9
General operations
Turning the unit on/off
Press /TFT OFF button on the
panel to turn the unit on. Press and
hold the button to turn the unit off.
Reset the unit
Operating the unit for the first time
or after replacing the car battery, you
must reset the unit. Press RESET
button (hole) with a pointed object
(such as a ballpoint pen) to set the
unit to initial state.
When some errors occur,
you can also press RESET button to
resume to normal, and it will erase
clock setting and some memorized
functions.
TFT display on/off
When the unit is on, press /TFT
OFF button on the panel to switch off
the display. When the display is off,
the video out signal will be available
so that the connected monitor will
show the screen of the unit. Press this
button again to resume the image.
Mode selection
• Press repeatedly MOD button on
the panel to select between Radio,
USB, Memory Card and auxiliary input
(AUX), operation modes. Modes of
operation are indicated on the display.
Memory card and USB modes are not
available unless a memory card or
USB device is connected.
• Or, in radio or AUX modes, press
button on the panel to display the
main menu. In the menu select an
operation mode by rotating VOLUME
knob on the panel, then SELECT
button on the panel to confirm
selection.
Volume control
Adjust volume by rotating VOLUME
knob on the panel.
Mute function
Press MUT button on the panel to
switch off the sound; press it again or
adjust volume to resume the sound.
Audio parameter setting
Press SELECT button on the panel
repeatedly to select a parameter:
VOL (volume) => BAS (bass) => TRE
(treble) => BAL (balance) => FAD
(fader) => EQ (equalizer) => Beep =>
Loud ON/OFF. Rotate VOLUME knob
on the panel or pressing V+/V- buttons
on the RC to adjust each mode:
• Volume: from 0 to 39;
• Bass/Treble: from -7 to 7;
• Balance: L7 (left) to R7 (right);
• Fader: from R7 (rear) to F7 (front);
• EQ: select OFF/POP/ROCK/
CLASSIC equalizer mode;
• Beep on: the beep sound is heard
when a button is pressed; beep off:
the sound is not heard;
• Loudness: select ON or OFF.
Activating this feature will enhance
bass and treble frequencies when
listening to music at low volumes.
When equalizer is in any mode
except OFF, bass and treble are not
adjustable.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован