- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CCR8089, страница 10
10
Operation
ST: Set radio reception at STEREO or
MONO mode. Improvement of reception of
distant stations can be done by selecting mono
mode, which may cut down some reception
noise. To select stereo or mono you can also
press STEREO/MONO button on the RC.
Time: Set the current time.
Time: Select 12-/24-hour time mode.
Beep: ON (beep sound will be heard when
buttons are pressed) and OFF (no beep sound
for button pressing).
Clock: Select ON to show the current time
on the display. Select OFF not to show time.
Retune: 30S/60S. RETUNE refers to the
time period the unit allows for radio scan when
reception is interrupted. “30S” represents
a time period of 30 seconds and “60S”
represents a time period of 60 seconds.
Mask: DPI/ALL. During DPI mode, the unit
will mask only the AF which has different PI,
this is the default mode; during ALL mode, the
unit will mask the AF which has different PI and
no RDS signal with high field strength.
TA: Seek/Alarm. In SEEK mode, the unit will
seek for traffic announcement program when
TA is pressed; in ALARM mode, no TA/TP is
displayed and the alarm is set off.
PICTURE
Mode: select picture mode: STD/SOFT/
BRIGHT/USER.
Brightness: Supports 50 levels.
Color: Supports 50 levels.
Contrast: Supports 50 levels.
EQ
Mode: EQ OFF => POP => ROCK =>
CLASSIC => JAZZ => FLAT.
Bass: support 14 levels. Default level is 0.
Treble: support 14 levels. Default level is 0.
AUDIO
Balance: support 7 levels for each left and
right channel.
Fade: support 7 levels for each front and
rear channel.
Loud: Set loudness on or off. LOUD function
is to emphasize the bass output.
General operations
Turning on/off
Press POWER/MUTE button on front panel
or press POWER button on the RC to turn on
the unit. Press and hold one of these buttons to
switch the unit off.
Volume control
Rotate VOLUME regulator or press VOL+/
VOL- buttons on the RC to adjust the volume
level.
Mute function
Press PWR/MUTE button on the panel or
MUTE button on the RC to turn the sound off.
Press it again or adjust the volume to turn the
sound on.
Setting the sound characteristics
• Press repeatedly SEL button on the RC
to enter the audio setting menu consisting of
following items: VOL (Volume) => BAS (Bass)
=> TRE (Treble) => BAL (Balance) => FAD
(Fader).
• Press VOL+/VOL- buttons on the RC or
rotate VOL button on front panel to adjust the
selected item.
If you turn off the power all the settings
of each mode will be saved. If you don’t adjust
setting within 5 seconds after selecting the
desired setting, the unit will automatically return
to the current mode.
System setup
• Press MENU button to enter the setting
mode.
• In the menu press LEFT/RIGHT cursor
buttons on the RC to select a setting page.
Press UP/DOWN cursor buttons on the RC to
choose a setting.
• Rotate VOLUME knob on the panel or
press VOL+/VOL- buttons on the RC to adjust
a setting.
• Following setting pages are available:
SETUP
Ваш отзыв будет первым