Просмотр инструкции автомагнитолы JVC KD-G541, страница 13
13
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 14 and 15.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
Indication, [Range]
BASS *
1
, [–06 to +06]
Adjust the bass.
MIDDLE *
1
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TREBLE *
1
, [–06 to +06]
Adjust the treble.
FADER *
2
, [R06 to F06]
Adjust the front and rear speaker output balance.
BALANCE *
3
, [L06 to R06]
Adjust the left and right speaker output balance.
LOUD *
4
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
SUB.W (subwoofer), [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL ADJ (volume adjust), [–05 to +05, initial: 00]
Adjust the volume level of each source (except FM), in
relation to the FM volume level. The volume level will
automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you
want to adjust.
VOLUME, [00 to 50 or 00 to 30] *
5
Adjust the volume.
*
1
When you adjust the bass, mid-range, or treble, the
adjustment you have made is stored for the currently
selected sound mode (iEQ) including “USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
This adjustment will not affect the subwoofer output.
*
4
The adjustment made (LOUD ON/LOUD OFF) will be
applied to all sound modes.
*
5
Depending on the amplifier gain control setting. (See
page 15 for details.)
Continued on the next page
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
Сортировать:
по дате
c ответами
Гость
10 ноября 2018, Ростов-на-Дону
Не гаснет экран после отключения