Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции автомагнитолы JVC KD-DV7308, страница 59

JVC
ENGLISH
59REFERENCES
Continued on the next page
Symptom Remedy/Cause
DivX/MPEG Video/MP3/WMA/AAC/
WAV and USB device
“PLEASE” and “EJECT” appear alternately
on the display while listening to a disc.
“NO FILE” or “NO USB” appears on the
display while listening to a USB device.
Insert a disc that contains tracks encoded in an
appropriate format.
Connect a USB device that contains tracks encoded in
an appropriate format.
The total number of tracks recorded on the USB device
could not be accessed properly.
Correct characters are not displayed (e.g.
album name).
This unit can only display letters (Roman and Cyrillic
alphabets—upper case), numbers, and a limited
number of symbols.
Bluetooth *
Bluetooth device does not detect the unit. The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
The unit does not detect the Bluetooth
device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. (See page 31.)
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Select the device name from “SPECIAL,” then try to
connect again. (See page 32.)
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth audio device.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped
during playback of a Bluetooth audio
device.
Reduce the distance between the unit and the
Bluetooth audio device.
Disconnect the device connected for “BT-PHONE.”
Turn off, then turn on the unit.
(When the sound is not yet restored,) connect the
device again.
The connected audio device cannot be
controlled.
Check whether the connected audio device supports
AVRCP (Audio Video Remote Control Profile).
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован