- Тип техники
- Бренд
Просмотр инструкции dvd-плеера Elenberg DVDP-2450, страница 89
TROUBLESHOOTING
SYMPTOM WHAT TO CHECK
The player cannot play.
-If disc is loaded in.
-If disc is loaded upside down.
-If disc is dirty or warped.
-If the player’s region code is the same as region code
of DVD disc.
-If water condensation has occurred.
-If it occurs, take out disc and leave the player on for at
least hours.
There is no sound.
-If system connection is correct.
-If the power of speakers is turned on.
-If the sound setup of DVD disc is correct.
-If disc is dirty or warped.
-If it occurs, clean it or press it.
There is no picture.
-If TV is turned on and is in correct video mode.
-If system connection is correct.
Poor AV performance. -If disc is dirty, warped or damaged.
Cannot continue to play and
play a section repeatedly.
-If it is in A-B repeat status.
-If it is true, press A-B button to cancel it.
-If disc is dirty or damaged.
-If it is true, clean it or skip the section.
The remote control does not
work.
-If there are obstructions between the remote control
and the player.
-If the remote control is pointing at the player.
-If batteries are inserted or the polarity is correct.
-If batteries are weak.
-If it is true, replace them.
Howling(feedback)occurs.
move the microphone away from TV or speakers.
lower the volume of player, TV and amplifier.
Others: Static or other external interfere may cause the abnormity of the player. In this
circumstance, unplug the power-supply cord from the outlet and plug it in again to reset
the player so that the normal operation will be resumed. If you are still having problems,
then please disconnect the power and consult your service cPlay or a qualified technician.
89
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
анатолий владимирович сердюк
19 декабря 2020, Киев
необходима схемы и инструкции для ремонта
0 ответов
Ответить
0