- Тип техники
- Бренд
Просмотр инструкции холодильника Beko GNE V021W, страница 23
EN
23
Replacing the Interior Light
BulbShould the light fail to
work, proceed as follows:
1. Switch off at the socket outlet and pull
out the mains plug.
Remove all shelves and drawers for easy
access.
2. Illumination covers in freezer and
fridge sections are opened by pressing
by hand; first release one side and then
the other by pressing on the sides as
shown in the figures.
3. First check that the bulb has not
worked loose by ensuring that it
is screwed securely in the holder.
Reinsert the plug and switch on. If the
bulb works, reinstall the light cover by
inserting the rear lug and pushing up to
locate the front two lugs.
4. If the light still fails to work, switch
off at the socket outlet and pull out the
mains plug. Replace the bulb with a new
15 watt (max) screw cap E14 (SES) bulb.
5. Carefully dispose of the burnt-out light
bulb immediately.
Replacement light bulb can easily be
obtained from a good local electrical or
DIY store.
Icematic and ice storage
container
(in some models)
Using the Icematic
Fill the Icematic with water and place
it into its seat. Your ice will be ready
approximately in two hours. Do not
remove the Icematic from its seating to
take ice.
Turn the knobs on it clockwise by 90
degrees.
Ice cubes in the cells will fall down into
the ice storage container below.
You may take out the ice storage
container and serve the ice cubes.
If you wish, you may keep the ice cubes
in the ice storage container.
Ice storage container
Ice storage container is only intended for
accumulating the ice cubes. Do not put
water in it. Otherwise, it will break.
Ваш отзыв будет первым