Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции видеокамеры Sony CCD-TR918E, страница 69

Sony
69
Customizing Your Camcorder Выполнение индивидуальных установок на видеокамере
Changing the menu settings
Icon/item
REC MODE
ORC TO SET
ORC stands for “Optimizing the Recording Condition”.
qREMAIN
Mode
z SP
LP
z AUTO
ON
Meaning
To record in SP (Standard Play) mode
To increase the recording time to twice the SP mode
To automatically adjust the recording condition to
get the best possible recording. Press START/STOP
to start adjustment. Your camcorder takes about 10
seconds to check the tape condition and then
returns to the standby mode.
To display the remaining tape bar:
for about 8 seconds after your camcorder is
turned on and calculates the remaining amount
of tape
for about 8 seconds after a cassette is inserted and
your camcorder calculates the remaining amount
of tape
for about 8 seconds after N is pressed in
PLAYER mode
for about 8 seconds after DISPLAY on the Remote
Commander is pressed to display the viewfinder
screen indicators (CCD-TR427E/TR617E/
TR717E/TR918E only)
for the period of tape rewinding, forwarding or
picture search in the PLAYER mode
To always display the remaining tape bar
POWER
switch
CAMERA
PLAYER
CAMERA
CAMERA
Notes on the LP mode
When you record a tape in the LP mode on your camcorder, we recommend playing the tape on your
camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures
or sound.
Noise may occur also when you play on your camcorder tapes recorded in the LP mode on other
camcorders or VCRs.
Notes on ORC setting
Each time you eject the cassette, the ORC setting will be canceled. If necessary, reset the setting.
You cannot use this setting on a tape with the red mark on the cassette exposed.
(i. e. the tape is write-protected)
When you set ORC TO SET, a non-recorded section of about 0.1 seconds appears on the tape.
However, note that this non-recorded section disappears from the tape when you continue recording
from this section.
To check if you have already set the ORC setting, select ORC TO SET in the menu settings. “ORC
ON” is displayed if ORC TO SET is already set.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован