- Тип техники
- Бренд
Просмотр инструкции кинескопного телевизора Sony KV-29LS40K, страница 20
20
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Problem Solution
No picture (screen is dark), no sound. • Check the aerial connection.
• Plug the TV in and press the button on the front
of TV.
• If the standby indicator is on, press button
on the remote control.
Poor or no picture (screen is dark), but good sound. • Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory settings.
No picture or no menu information from equipment
connected to the Scart connector.
• Check that the optional equipment is on and press
the button repeatedly on the remote control until
the correct input symbol is displayed on the screen.
Good picture, no sound. • Press the button on the remote control.
• Check that “TV Speakers” is “On” on the “Sound
Adjustment” menu.
• Check that headphones are not connected.
No colour on colour programmes. • Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings.
Distorted picture when changing programmes or
selecting teletext.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
Wrong characters appear when viewing teletext. • Using the menu system, enter to the “Language/
Country” menu and select the country in which you
operate the TV. For Cyrillic languages, we
recommend to select Russia country in the case that
your own country does not appear in the list.
Picture slanted. • Using the menu system, select the “Picture
Rotation” option in the “Detail Set Up” menu to
correct the slant.
Noisy picture when viewing a TV channel. • Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
• Using the menu system, select the “Noise
Reduction” option in the “Detail Set Up” menu and
select “Auto” to reduce the noise in the picture.
No unscrambling or unstable picture whilst viewing a
scrambling channel with a decoder connected through
the Scart connector 2/ .
• Using the menu system, select the “Set Up” menu.
Then enter to the “Detail Set Up” option and set
“AV2 Output” to “TV”.
Remote control does not function. • Replace the batteries.
The standby indicator on the TV flashes. • Contact your nearest Sony service centre.
S
Additional Information
In case of problems, have your TV serviced by qualified personnel. Never opening the casing yourself.
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Гость
13 мая 2019, Астана
Мигает 2 раза не включается телеаизор
0 ответов
Ответить
0