- Тип техники
- Бренд
Просмотр инструкции ресивера и усилителя Yamaha RX-V2065, страница 72
70 En
Troubleshooting
Note
• In case of a transmission error without a status message appearing on the front panel display and GUI screen, check the connection of your iPod
(page 18).
Remote control
Problem Cause Remedy
See
page
The remote control
does not work or
function properly.
Wrong distance or angle. The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees
offaxis from the front panel.
6
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, strobe
light, etc.) is striking the remote control
sensor of this unit.
Adjust the lighting angle or reposition this unit. —
The batteries are weak. Replace all batteries. 6, 8
The remote control ID of the remote
control and this unit do not match.
Match the remote control ID of this unit and the
remote control.
64
The remote control code is not correctly
set.
Set the remote control code correctly using “List of
remote control codes” at the end of this manual.
61
Try setting another code of the same manufacturer
using “List of remote control codes” at the end of this
manual.
61
If this unit does not work when you press jCursor,
do the following.
When the key does not work during DVD disc menu
operation: press the dInput selection keys on
the remote control again.
When the key does not work during Option menu or
Setup menu operation: press the key applicable for
the current menu operation again.
—
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
The remote control
does not learn new
functions.
The batteries of remote control of this unit
(or the external component) are weak.
Replace the batteries 6
The distance between the two remote
controls is too long or too short.
Place the remote controls at a proper distance. 62
The signal coding or modulation of the
other remote control is not compatible
with this remote control.
Learning is not possible. —
Memory capacity is full. Delete unnecessary functions to free some memory
space for the new functions.
62
iPod™
Status message Cause Remedy
See
page
Loading... This unit is in the middle of recognizing
the connection with your iPod.
This unit is in the middle of acquiring
song lists from your iPod.
Ваш отзыв будет первым