Просмотр инструкции ресивера и усилителя Yamaha RX-V2065, страница 71
69 En
Troubleshooting
English
INTRODUCTION
APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
Tuner (FM/AM)
Problem Cause Remedy
See
page
FM
FM stereo reception is
noisy.
You are too far from the station
transmitter or the input from the
antenna is weak.
Check the antenna connections. 20
Replace the outdoor antenna with a more
sensitive multi-element antenna.
—
Switch to monaural mode. 44
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multi-path interference. Adjust the antenna height or orientation, or
place it in a different location.
—
The desired station
cannot be tuned into
with the automatic
tuning method.
You are in an area far from a station or
an input from the antenna is weak.
Replace an outdoor antenna with more
sensitive multi element antenna.
—
Tune in manually or by direct frequency
tuning.
31
AM
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Adjust the AM loop antenna orientation. 20
Use the manual tuning method. 31
Automatic station preset
does not work.
Automatic station preset is not
available for AM stations.
Use manual station preset. 32
There are continuous
crackling and hissing
noises.
Supplied AM loop antenna is not
connected.
Connect the AM loop antenna correctly even
if you use an outdoor antenna.
20
The noises may be caused by lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
20
There are buzzing and
whining noises.
A TV set is being used nearby. Move this unit away from the TV set. —
AM stations cannot be
preset by automatic
station preset.
Only FM Radio Data System
broadcasting stations are stored
automatically by automatic station
preset.
Register AM stations by manual station
preset.
32
Ваш отзыв будет первым