Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции стиральной машины Zanussi FA 1023 (Aquacycle 1050), страница 20

Zanussi
20
Something not working?
Problems which you can resolve yourself.
Problem Possible cause
The machine does not start up:
The door is not firmly closed.
The machine is not plugged in or there is no power
at the socket.
The main fuse has blown.
The programme selector is not positioned correctly or
the programme selector knob has not been pulled out.
The machine does not fill:
The water tap is closed.
The inlet hose is squashed or kinked.
The filter in the inlet hose is blocked.
The door is not properly closed.
The machine fills then empties
immediately:
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
The machine does not empty
and/or does not spin:
The drain hose is squashed or kinked.
The option has been selected.
The laundry is not evenly distributed in the drum.
The drainage area is blocked. Clean it.
There is water on the floor:
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
The drain hose is damaged.
Check that the diaphragm lid is correctly screwed
into place.
Unsatisfactory washing results:
Too little detergent or unsuitable detergent has
been used.
Stubborn stains have not been treated prior to
washing.
The correct temperature was not selected.
Excessive laundry load.
The machine vibrates or is
noisy:
The transit bolts and packing have not been
removed.
The support feet have not been adjusted.
The laundry is not evenly distributed in the drum.
Maybe there is very little laundry in the drum.
The door will not open:
The programme is still running.
The door lock has not been released.
There is water in the drum.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован
Посетитель_Ih99vr
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Искать
Посетитель_Kd77ij
13 февраля 2024
Что обозначает литера C
Болат
24 сентября 2023
При включении перешагивает по режимам и останавливается
Наталья
06 ноября 2022, Омская
Как пользавотся стиральной машиной автомат зануси
Лида
14 декабря 2020, Киев
Режимы стирки программы для Занусси 1023
kote gagnashvili
10 октября 2020, Тбилиси
vada ne slivaetsa iz baka polnostiu
Гость
04 октября 2020, Актобе
Инструкция пользования стиральной машины занусси 1023
Гость
04 октября 2020, Актобе
Инструкция пользования стиральной машины занусси 1023
Гость
17 июля 2020
Значение кнопок на панели
Гость
23 апреля 2020, Алматы
Стирает но не отжимант
Дик
04 октября 2019, Нур-Султан
Стирает, но не отжимает,
Показать еще