- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-8128, страница 4
4
ENGLISH
operation cycles, place the unit out of reach of
children.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Attention! Do not allow children to play with poly
-
ethylene bags or packaging film. Danger of suf-
focation!
•
Regularly check the power plug and power cord
integrity for damages.
•
Never use the unit if the power cord or the power
plug is damaged, if the unit works improperly or
after it was dropped.
•
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction is
detected or after it was dropped, unplug the unit
and apply to any authorized service center from
the contact address list given in the warranty
certificate and on the website www.vitek.ru.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low tem
-
perature keep it for at least three hours at room
temperature before switching on.
–
Unpack the unit, remove any stickers and pack-
age materials that can prevent the vacuum
cleaner operation.
–
Check the unit for damages; do not use it in case
of damages.
–
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
ASSEMBLING THE VACUUM CLEANER
Attaching and removing the flexible hose
•
Insert the flexible hose ending (8) into the air
inlet (10) (pic. 1).
•
Insert the hose with a slight effort until locking.
•
If you need to remove the flexible hose, press
the lock (9) and detach the hose.
Attaching the telescopic pipe
and the attachments
•
Attach the telescopic extension pipe (4) to the
handle of the flexible hose (6) (pic. 2).
•
Extend the lower part of the telescopic extension
pipe to the required length, having preliminary
pressed the clamp (3).
•
Choose the necessary attachment – the floor/
carpet brush (1), the crevice nozzle (25) or the
attachment (24) – and attach it to the telescopic
extension pipe (4).
•
If necessary, you can attach the attachments
(24, 25) directly to the flexible hose handle (6).
•
During the operation hold the unit by the han-
dle (6).
USING THE BRUSH ATTACHMENTS
Universal brush with the “FLOOR/CARPET”
switch (1)
Set the switch (2) on the brush (1) to the required
position (depending on the type of the surface being
cleaned).
Universal crevice nozzle (25)
This attachment can be used as a dust brush or a
crevice nozzle; to do this set the brush to the nec
-
essary position.
Furniture brush (24)
Use the attachment (24) for cleaning fabric sur
-
faces of upholstered furniture.
Attachment holder (26)
Install the holder (26) on any part of the flexible
hose (7), install the attachments (24 and 25) on the
holder (26).
Dust bin (11)
The dust bin (11) is equipped with the cyclonic fil
-
ter which eliminates garbage and dust from the
air, and the HEPA (20) filter retains the finest dust
particles.
Note:
–
provide that the HEPA filter (20) is always clean,
because the overall performance of the vacuum
cleaner depends on it;
–
the dust bin (11) is equipped with the block-
ing device (21) preventing the dust bin (11)
installation without the HEPA filter (20). Always
IM VT-8128.indd 4 20.08.2018 12:02:12
Ваш отзыв будет первым