- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1839 R/B/BK, страница 6
6
ENGLISH
Floor and carpet brush (1) (pic. 4,
5)
Set the switch on the brush at a re-
quired position (depending on the sur-
face type for cleaning)
Slit-type attachment (20)
For cleaning of radiators, slits, corners
and between sofa pillows.
Attachment for furniture upholstery
(21)
Attachment is intended to clean fabric
surface of upholstered furniture.
Small brush (22)
Small brush is intended to remove dust
from the surface of the furniture. Pile
on the brush prevents damage of the
polished surface of the furniture.
Usage of the fabric or paper dust
bag (Pic. 6)
• Open the dust bag compartment lid
(17), holding the clamp (6).
• Press the dust bag holder (19) and
Set a fabric (18) or paper dust bag
(18) in the dust bag holder.
• Close the dust bag lid (17).
Removal of the fabric or paper dust
bag
• Open the dust bag lid (17), press the
dust bag holder (19) and remove the
dust bag.
• A paper dust bag (23) is disposable
and should be utilized when filled.
• A fabric dust bag (18) is reusable, re-
move dust and rubbish out of it, by
moving the plastic clamp, after it set
the clamp on its place.
User instruction
Before operating extend the power ca-
ble for a needed length and insert the
plug into the socket. Yellow mark on
the power cable notices about max.
cable length.
Do not extend the power cable beyond
the red mark.
Attention!
- Always switch the vacuum cleaner on
only with the paper or fabric dust bag
(18, 23) and filters (12, 15) installed.
- While using a paper (23) or a fabric
(18) dust bag, make sure that it is set
properly.
Note:
If a dust bag is set improperly,
the dust bag will not close, always
check whether the dust bag is set
properly before closing the lid.
1. To switch the vacuum cleaner on
press the ON/OFF (14) button.
2. While operation you can regulate
suction force by moving power
regulation handle (13) or by the me-
chanical regulator situated on the
handle of the flexible hose (3) .
3. After you have finished cleaning
press the ON/OFF button (14) and
pull out the plug from the socket.
4. To wind the power cable press the
button (9), hold the winding cable
with your hand in order to avoid
whipping and damage.
AUTO OFF FUNCTION
The vacuum cleaner is equipped with
auto off function while overheating.
• While overheating auto thermo fuse
1839.indd 61839.indd 6 07.10.2010 15:59:2507.10.2010 15:59:25
Ваш отзыв будет первым