- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1830 SR, страница 4
4
ENGLISH
- if there is no water in the container for dust
and rubbish;
- if the air separator and suction pipe are not
installed in the container;
- if the container with the НЕРА-filter is not in-
stalled.
Check the power cord and the power plug for •
damages regularly. If there are some dam-
ages in the power cord, the power plug, or if
the unit malfunctions, apply to the authorized
service center.
The unit is intended for household usage only; •
commercial usage of the vacuum cleaner is
prohibited.
STORE THE INSTRUCTIONS IN A CONVENIENT
PLACE
SAFETY PRECAUTIONS
Do not use the vacuum cleaner in the imme-•
diate vicinity of very hot surfaces, next to ash
trays, or where flammable liquids are stored.
Before beginning to clean, remove sharp ob-•
jects from the floor to avoid damage of the fil-
ters.
If suction power decreases abruptly while •
cleaning, immediately turn off the vacuum
cleaner and check the telescoping tube or
flexible hose for foreign objects. Turn off the
vacuum cleaner, and then unplug it from the
power outlet. Clear the obstruction and only
then proceed with cleaning.
Assembling the vacuum cleaner
Before turning on the vacuum cleaner, make
sure that the voltage of the mains corresponds
to the voltage of the vacuum cleaner.
Always turn off the vacuum cleaner and unplug it
from the outlet before changing the brushes/at-
tachments, and before performing maintenance
on it.
Filling the container for dust and rubbish
with water
Take the handle (6) remove the container (5) •
from the body of the vacuum cleaner (pic.1).
Remove the container lid (14), remove the •
suction pipe (11) and the air separator (12)
from the container (5) (pic.2, 3).
Fill the container (5) with tapping water till the •
MAX mark (pic.4).
Note: Necessary quantity of water is 1200 ml.
Put the air separator on its place (12).•
Open the air intensity supply valve (13) and •
set the suction pipe (11) above it (pic.11).
Note: In the open position of the valve (13)
(pic.11), two air flows, which more inten-
sively divide water into small drops form
in the container (5), and the smaller the
drops are, the more effective is suction of
small dust.
Close the container with the lid (14) (pic.5). •
Set the container for dust and rubbish on the •
body of the unit.
Attaching and removing the flexible hose
Insert the end of the flexible hose (18) in the •
air inlet (7).
To remove the flexible hose end (18) it is de-•
sirable to turn it slightly (pic.6).
Attaching the extension pipe and the attach-
ments
Attach the telescoping extension pipe (8) to •
the flexible hose handle (16).
Extend the lower part of the telescoping pipe •
to the desired length by pressing the locking
button.
Select the desired attachment: turbo brush •
(19), carpet/floor brush (20) small brush
(22), crevice attachment (23), attachment for
furniture surface (21) and connect it to the
telescoping extension pipe (8).
Turbo-brush (19)
The turbo brush (19) can be used to clean floors,
rugs and carpets with long or short pile, and is
ideal for picking up animal fur. The cylindrical
brush with hard bristles rotates under the ac-
tion of the air current and its bristles effectively
remove animal fur and loose carpet and rug fi-
bers.
Note: Never use the turbo brush to clean
rugs with fringe and pile of 15 mm or
more, because the rotating brush can
cause damage to such rugs. Do not run
the turbo brush over power cords and
4
ENGLISH
VT-1830 SR.indd 4VT-1830 SR.indd 4 02.08.2011 9:41:3702.08.2011 9:41:37
Ваш отзыв будет первым