- Тип техники
- Бренд
Просмотр инструкции соковыжималки Saturn ST-FP8054, страница 5
4
Performances
1.For the juicer with large diameter,
entire apple or pear can be put in for
juicing, no cutting apart needed, easy
and quick.
2.Design is fine, simple, and beautiful,
with combined structure, easy to
operate and clean.
3.High speed electric motor with
overheating protection is adopted, high
efficiency, time saving, energy saving,
high service life of the motor.
4.Safety lock unit for switching is
specially designed, in order to make
sure safety and reliability in use.
Attention before using
1.This machine is set with safety unit,
when the handle does not fasten the
cover or the cutter seat is not fastened,
the motor cannot turn, so as to ensure
safety for the user.
2.When disassembling or assembling
the juicer, press the upper of feed port
of the cover with your hand, then force
the handle to slide in or out of cover
slot.
3.When disassembling juicing net, first
remove the cover and residue barrel,
then put up the middle ring by holding
juicing nozzle with your hand, and take
up, the juicing net will automatically
leave the rotor.
4.In order to avoid damage, before
using, first check power supply for
compliance with rated voltage.
5.Clean all parts able to disassemble
(refer to the section of "maintenance
and cleaning").
6.When assembling, please carefully
read the diagram of "name and position
of main components".
7.Please carefully read the "attentions"
before using.
Juicing
1.Before using, please confirm the
button switch of the main machine in
stop state, in this way, in case assembly
is not completed, starting the main
machine can be avoided, so
unnecessary damage for persons or
property avoided.
2.Before juicing, first confirm juicing net
and rotor clutched in position, and no
hard contact between juicing net cutter
and transparent cover. Put the
transparent cover on, put the handle
into the cover slot, then turn on the
machine.
3.For using, assemble according to the
diagram of "name and position of main
components". Turn on power supply,
press switch to let the machine run no-
load for 5 sec. Put prepared vegetable
or fruit into feed port of the juicer, press
with the pushing bar, evenly, hard and
slowly, juice of the vegetable or fruit
can be found, original, fresh, good for
health.
4.Note: When pressing food with the
pushing bar, force shall be even or
indirect, pressing force shall not be
more than 1 kg, no too sudden force,
otherwise, juicing effect will be reduced.
Operating time
This machine is designed with button
switches of O grading, I grading, II
grading (O for stop, I for weak grading,
II for strong grading). For juicing,
select strong grading, for operating
time, after operating for 1min, stop for
1min, then use again. After the above
operation is performed for three times,
stop for 15 min, do not operate until the
motor is cooled, in this way, service life
of this machine will be prolonged, the
machine will serve you more efficiently.
Attention
1.This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
abilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety. Children
should be supervised to ensure that
they do not play with the appliance.
2.Before using, put this machine on a
stable and even table board, operate
according to the above methods.
3.Before being used, the motor works in
running-in phase, there may be slight
peculiar smell and spark, this is normal,
after the motor works for some period,
the above phenomenon will disappear.
4.During juicing, make sure there is not
too full juice and residue in the middle
seat and residue cup, if too full, please
cut off power supply, clean up, then use
again.
5.During using, do not open the cup
cover. In case power supply is on, do
not put hand or any ware into the
mixing cup or feed port, otherwise,
harmful accident may occur or this
machine may be damaged.
6.In order to prolong service life of this
machine, over-temperature protective
device is mounted in the motor. If the
motor works for a long time or
overloaded, when over warning
temperature, power supply will
automatically cut off. After the motor
stops, pull out plug of power supply,
wait for the motor to cool (about for 30
min), use again.
Ваш отзыв будет первым