- Тип техники
- Бренд
Просмотр инструкции измерительного прибора Condtrol XLiner Combo, страница 16
XLiner / XLiner Combo CONDTROL
XLiner / XLiner Combo CONDTROL
30
31
user manual user manual
EN EN
TECHNICAL DATA
Parameter Value
Working range/with detector 50m/100m*
Leveling accuracy ±0.2mm/m
Self-leveling range ±5°
Leveling duration, typically <4 sec
Operating temperature -20°C…+50°C
Storage temperature -40°C…+70°C
Relative air humidity, max 90%
Laser type 635nm, <1 mW
Laser class II
Tripod mount 1/4'', 5/8''
Batteries 3x1.5V LR6 (AA)
Operating life time 20 hours
Automatic switch-off 60 min
Weight 0.39kg
Dimensions 131x74x113mm
* An operating range can be different from the stated above subject to
light conditions
OPERATION
• Protect the instrument from moisture and direct sunlight.
• Protect the instrument from extreme temperatures and temperature
fluctuations. Do not leave the instrument, for example, in a car for a long
time. At large temperature fluctuations, before switching-on, it is necessary
to wait until the temperature aligns.
• Protect the instrument from blows and falls. After a strong external
influence on the instrument it is always necessary to check accuracy before
starting the work again (See «Accuracy Check»).
• Switch off the instrument during transportation. Always switch the On/Off D
to the right position. When switching off, the leveling unit, which can be
damaged in case of intense movement, is locked.
Switch on/off
Press the button 1 to switch on the instrument.
By consecutive pressing 1 the instrument is switched to the different
operating modes displayed on the keypad (horizon; vertical; horizon and
vertical at the same time; defining of directions; horizon, vertical, defining
of directions at the same time).
To work with the automatic compensation switch on the instrument as it
is described above and switch the On/Off D to the outside left position.
Switching of the operating modes also is made by pressing 1.
At a low charge of the batteries the indicator 3 flashes red.
- Do not direct the laser beam on people or animals and do not look
in the laser beam, even from a long distance.
- Do not leave the switched-on instrument unattended and switch
it off after using.
To switch off the instrument move the On/Off D to the right position,
at this the leveling unit is blocked, press and hold the button 1 within 2
seconds.
Ваш отзыв будет первым