- Тип техники
- Бренд
Просмотр инструкции инструмента Bosch GDB 2500 WE, страница 14
14 | English
1 609 929 W83 | (9.11.10) Bosch Power Tools
f Never use the machine with a damaged
cable. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables
increase the risk of an electric shock.
f Check the cable regularly and have a dam-
aged cable repaired only through an author-
ised customer service agent for Bosch power
tools. Replace damaged extension cables.
This will ensure that the safety of the power
tool is maintained.
f Wear non-skid shoes. This prevents injuries
that can occur from slipping on smooth sur-
faces.
f Use only original Bosch accessories.
f The safety and operating instructions for
the drill stand and the accessories being
used are to be strictly observed!
f Never leave the machine before it has come
to a complete stop. Cutting tools that are
still running can cause injuries.
f Connect the machine to a mains supply with
proper earthing connection. Socket outlet
and extension cable must be equipped with
an operative protective conductor.
f Products sold in GB only: Your product is fit-
ted with an BS 1363/A approved electric plug
with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the origi-
nal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should nev-
er be inserted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a re-
sidual current device (RCD) with a rated re-
sidual current of 30 mA or less.
Functional Description
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
In conjunction with wet-drilling diamond core
bits and a water supply, the machine is intended
for wet drilling in mineral materials such as con-
crete and reinforced concrete. It is not suitable
for overhead drilling. The machine may only be
used in conjunction with the S 500 A diamond-
drill stand. The machine can be used in combi-
nation with an extraction device (water collec-
tion ring and all-purpose vac).
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 S 500 A diamond-drill stand*
2 Residual current device (RCD)
3 Water outlet connector
4 Gear selector
5 Feed handle (S 500 A)
6 Water collection ring*
7 Core bit*
8 Sliding ring*
9 Drill spindle
10 Water-flow indicator
11 Water cock
12 Control indicator
13 On/Off switch
14 Insulated gripping surfaces
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
OBJ_BUCH-114-002.book Page 14 Tuesday, November 9, 2010 11:58 AM
Ваш отзыв будет первым