- Тип техники
- Бренд
Просмотр инструкции сварочного оборудования Fubag TS MIG 300 T PRO, страница 7
www.fubag.ru
Omperator's anual
- 6 -
8. Installation and Connection Wire Feeder System
-
-
-
-
Select suitable wire according to welding technology. The wire diameter must be matched with
drive roll, wire guide pipe liner and contact tip.
Install the wire spool to the wire spool axle, and then fix.
Open the left side board, you can see the wire feeding system.
Open the wire feed compaction equipment, let the terminal of wire through the wire guide tube,
drive roller and import the wire guide tube of welding torch, and close the impaction equipment,
adjust the compaction nut of drive roller.
9.Connection Torch
The torch is composed by torch stand, connecting cable and handle.
Torch stand is the interface of torch and wire feeding device.
Connecting cable: covered by nylon pipe the liner is loaded in the center of coreless cable. The inner
part of liner is the passage for wire feeding. The space between liner and coreless cable is the
passage for shielded gas. Coreless cable is the passage for current.
Set with a sensitive switch on the handle to control the welding current.
1 - Wire spool axle
2 - Compaction equipment
3 - Compaction nut
1
2
3
Ваш отзыв будет первым