- Тип техники
- Бренд
Просмотр инструкции варочной панели Gorenje G 640 AX1, страница 47
47
SERVICING
Always disconnect the appliance from the electricity and gas mains before proceeding with any servicing
operation.
11) REPLACING HOT PLATE PARTS
When parts housed within the hot plate need replacing, it is first necessary to remove the hot plate itself from
the cabinet, to overturn it, unscrew screws “V” and to remove part (see fig. 14).
After having carried out the above listed operations, the burners (fig. 15), taps (fig. 16) and electrical
components can all be replaced (fig. 17).
NB: the ignition bar must be removed before replacing the taps in appliances with automatic ignition
systems.
It is advisable to change seal “D” whenever a tap is replaced to ensure a perfect tightness.
Greasing the taps (see fig. 18 - 19)
If a tap becomes stiff to operate, it must be immediately greased in compliance with the following
instructions:
- remove the tap.
- Clean the cone and its housing using a cloth soaked in diluent.
- Lightly spread the cone with the relative grease.
- Fit the cone back in place, operate it several times and then remove it again. Eliminate any excess grease
and check that the gas ducts have not become clogged.
- Fit all parts back in place, complying with the demounting order in reverse.
- The tight closure test must be done using a foamy liquid. The use of the flame is prohibited.
To facilitate the servicing technician’s task, here is a chart with the types and sections of the powering cables
and the ratings of the electrical components.
FIG. 14 FIG. 15 FIG. 16
FIG. 17 FIG. 18 FIG. 19
Ваш отзыв будет первым