- Тип техники
- Бренд
Просмотр инструкции варочной панели Gorenje G 64 AX1, страница 46
46
CONVERSIONS
10) REPLACING THE INJECTORS
The burners can be adapted to different types of gas by mounting injectors suited to the type of gas in
question.
To do this, first remove the burner tops using a wrench “B”. Now unscrew injector “A”
(see fig. 13) and fit a injector corresponding to the utilized type of gas in its place.
It is advisable to strongly tighten the injector in place.
After the injectors have been replaced, the burners must be regulated as explained in paragraphs 9. The
technician must reset any seals on the regulating or pre-regulating devices.
The envelope with the injectors and the labels can be included in the kit, or at disposal to the authorized
customer Service Centre.
For the sake of convenience, the nominal rate table also lists the heat inputs of the burners, the diameter of
the injectors and the working pressures of the various types of gas.
BURNER ARRANGEMENT ON THE HOT PLATE
FIG. 13
TABLE
Burners
Normal
Rate
(Маx.)
Injector
diameter
Normal heat
input (W)
№ Description
Gas
Normal
Pressare
mbar
g/h L/h 1/100 mm
Min. Маx.
2 Rapid
G30 - Butane
G20 - Natural
G20 - Natural
30
13
20
196
286
267
80
126 Y
117 S
800
800
800
2700
2700
2800
3
Semirapid right
front
G30 - Butane
G20 - Natural
G20 - Natural
30
13
20
124
180
162
65
102 Y
97 Z
500
500
500
1700
1700
1700
4
Semirapid left
back
G30 - Butane
G20 - Natural
G20 - Natural
30
13
20
124
180
162
65
102 Y
97 Z
500
500
500
1700
1700
1700
5 Auxiliary
G30 - Butane
G20 - Natural
G20 - Natural
30
13
20
73
106
95
50
85 X
72 X
400
400
400
1000
1000
1000
Ваш отзыв будет первым