- Тип техники
- Бренд
Просмотр инструкции утюга Bosch TDS 2510, страница 14
14
en
Trouble shooting
Problem Possible causes Solution
The steam
generator does
not come on.
• There is a connection problem.
• The steam tank and/or main power
button is not switched on.
• Check the mains cable, the plug and
the socket.
• Press the buttons for main power (6)
and steam tank (4) «On/Start».
The iron does not
heat up.
• The main power button is not switched
on.
• The temperature control knob is set to
the «min» position.
• Press the main power button (6)
«On».
• Set the temperature control knob
(13) to the desired position.
The iron begins
to smoke when
switched on.
• During first use: Certain components on
the appliance have been lightly greased
at the factory and may produce a little
smoke when initially heated.
• During later use: the soleplate may be
soiled.
• This is completely normal and will
stop after a short while.
• Clean the soleplate according to the
cleaning instructions in this manual.
Water flows
through the holes
on the sole plate.
• The steam function is being used before
it has reached temperature.
• The water is condensing inside the pipes
because steam is being used for the
first time or has not been used for a long
time.
• Reduce the steam flow when ironing
at low temperatures (Variable steam
control (3)).
• Point the iron away from the ironing
area and press the steam release
button (15) until steam is produced.
Dirt comes out
through the sole
plate.
• There is a build-up of scale or minerals
in the steam tank.
• Chemical products or additives have
been used.
• Use tap water mixed 50% with
distilled or demineralised water.
• Clean the sole plate with a damp
cloth.
• Never add products to the boiler
water.
Cleaning & Maintenance
1. After ironing, pull out the plug and allow the
appliance to cool down before cleaning.
2. Wipe the housing, handle and iron body with a
damp cloth.
3. If the soleplate is soiled with dirt or scale, clean
it with a damp cloth.
4. Never use abrasive products or solvents.
Important:
• Always unplug the appliance from the mains
supply before carrying out any cleaning or
maintenance operation on it.
Storing the appliance (D)
1. Always allow the appliance to cool down before
storing it.
2. Set the switches for main power and steam
boiler to the
«Off/Stop» position and disconnect
the connection.
3. Place the iron on the iron pad, standing on the
soleplate.
4. Empty the water tank and store the mains cable
on the cord rewind facility. Tidy the steam hose
on the handle of the iron using the cord clip
provided (12). Do not wrap the cords too tight.
Ваш отзыв будет первым