- Тип техники
- Бренд
Просмотр инструкции холодильника AEG S 75438 KG, страница 7
The temperature that has been selected for inside the fridge or the freezer. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature indicator shows the current temperature inside the fridge or the freezer.
The ACTUAL temperature is indicated with illuminated numbers.
Temperature regulation
To operate the appliance, proceed as follows:
1. Set the required temperature by pressing the corresponding temperature regulator. The
temperature indicator will immediately show the changed setting (DESIRED tempera-
ture) and the temperature indicator flashes.
2. Each time the temperature regulator is pressed the DESIRED temperature is adjusted
by 1 °C. The DESIRED temperature must be reached within 24 hours.
3. Once the required temperature has been set, after a short period (approx. 5 sec.) the
temperature indicator will show again the current ACTUAL temperature inside the cor-
responding compartment. The temperature indicator will change from flashing to con-
tinuous illumination.
For a correct storage of the food the following temperatures should be set:
• +5 °C in the fridge
• -18 °C in the freezer.
When the setting is changed, the compressor does not start immediately if automatic
defrosting is currently taking place. As the storage temperature within the fridge is reached
quickly you can store food immediately after switching on.
Temperature indicators
The temperature indicators can indicate several pieces of information.
• During normal operation, the temperature currently present in the fridge (ACTUAL tem-
perature) is displayed.
• In the freezer the warmest temperature is displayed (ACTUAL temperature). When fully
filled, the warmest zone is normally located at the top in the front area of the freezer .
Depending upon how the section is filled, the temperatures are lower in other areas of
the freezer .
• When the temperature is being adjusted a flashing display indicates the fridge or the
freezer temperature currently set (DESIRED temperature).
When changing the temperature setting wait about 24 hours until the temperature display
has stabilised.
If there is a fault in the appliance the temperature indicator shows:
• a square or a letter in the temperature indicator of the fridge for a fault in the fridge,
• a square or a letter in the temperature indicator of the freezer for a fault in the freezer.
MODE button
Different operating modes can be set using the MODE button.
The following operating modes can be selected:
•SHOPPING
•FROSTMATIC
• COOLMATIC
Control panel
7
Ваш отзыв будет первым