- Тип техники
- Бренд
Просмотр инструкции посудомоечной машины Kaiser S 60 I 60 XL, страница 10
10
EN
1
Connecting cold water
•
Connect the cold water inlet hose to the
threaded 3/4-inch connector. Make sure it
is fastened tightly.
If the water pipes are new or have not been used
for an extended period of time, let the water run to
make sure that the water is clear and free of
impurities.
If this precaution is not taken, there is a risk that
the water inlet
can get blocked and damage the
appliance.
Connecting hot water
The inlet hose of the appliance can be also
connected to the hot water supply provided the
temperature doesn’t exceed 60° C.
In this case, both the wash cycle time
and the
power consumption are reduced.
For hot water connection follow the same
procedure as that for cold water.
Connecting drain hose
• Connect the drain hose to the drain pipe 1
(diameter: 40 mm min.), or let it run directly
into the sink 2.
Use the special plastic hose support
which is
delivered with the appliance.
The free end of the hose must be at a height of 40
to 100 cm and must not be immersed. Make sure
that the hose is free from being bent or flattened.
1
2
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Альмусаев Болат Габдушевич
15 февраля 2019, Кокшетау
Доброе утро! Инструкция на подключение к работе модели S 60 160 XL? Правильная эксплуатация в домашних условиях! Заранее благодарен!
0 ответов
Ответить
0