Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции видеодвойки Philips 15PT6807_01, страница 14

Philips
14
Tips
Poor reception
No picture
Peripheral
equipment gives a
black and white
picture
The remote control
no longer works
No sound
Teletext
Does the DVD
player no longer
work ?
Remote control
Standby
Still no results ?
The proximity of mountains or high buildings may be responsible for ghost
pictures, echoing or shadows. In this case, try manually adjusting your
picture : see Fine Tuning (p.5) or modify the orientation of the outside
aerial.
Does your antenna enable you to receive broadcasts in this frequency range
(UHF or VHF band) ?
In the event of difficult reception (snowy picture) switch the NR on the
Picture menu to ON (p. 6).
Have you connected the aerial socket properly ?
Have you chosen the right system ? (p. 5). Poorly connected euroconnector
cables or aerial sockets are often the cause of picture or sound problems
(sometimes the connectors can become half disconnected if the TV set is
moved or turned). Check all connections.
To play a video cassette, check that it has been recorded under the same
standard (PAL, SECAM, NTSC) which can be replayed by the video
recorder.
Check that the mode selector on the side of the remote control is set to
TV.
If on certain channels you receive a picture but no sound, this means that
you do not have the correct TV system. Modify the System setting (p. 5).
Are certain characters not displayed correctly ? Check that the Country
setting has been positioned correctly (p.4).
Check that the disc does not have any fingerprints on it. Clean it with a soft
cloth, wiping from the centre to the edge.
The TV set does not react to the remote control ; the indicator on the set
no longer flashes when you use the remote control ? Replace the batteries.
When you switch the TV set on it remains in standby mode and the
indication Locked is displayed when you use the keys on the TV set ?
The Child Lock function is switched On (p. 7).
If the set receives no signal for 15 mins, it automatically goes into standby
mode.
To save power, your set is fitted with components that give it a very low power
consumption when in standby mode (less than 3 W).
If your TV set breaks down, never attempt to repair it yourself : contact
your dealer's after-sales service.
Cleaning the set
Only use a clean, soft and lint-free cloth to clean the screen and the casing
of your set. Do not use alcohol-based or solvent-based products.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован

Смотрите также другие инструкции раздела Видеодвойки

Смотрите также другие инструкции раздела Philips